RE-TAP-ER Second Operation Machine and STC-TAP-ER Tapping Machine

RE-TAP-ER Second Operation Machine

Click on the Catalog Number to order online!
CAT. NO.	BB-SR

THE FASTEST AND EASIEST WAY TO:
• Retap threaded parts
• Chase threads
• Remove cutoff burrs from threads
• Inspect threads (with thread gage mounted in chuck)
• Countersink holes
• Deburr holes
• Ream holes

1/2" capacity chuck
1/3 H.P., 115V, Single Phase
1725 RPM, A48 Frame Motor*
Weight 27 lbs

*Can be supplied without motor or with special motors for countries where this is not suitable. Prices on application.

The Re-TAP-er has a double disc friction drive that reverses rotation instantly by the application of forward or backward hand pressure on the part being retapped.
The friction discs are driven by a Rubber Drive Ring mounted on the motor shaft.
The maximum spindle speed it 1,000 RPM**

Click on the Catalog Number to order online!
CAT. NO.	DESCRIPTION
BB-7	DRIVE RING - BLACK NEOPRENE
BB-7HD	HEAVY DUTY DRIVE RING - ORANGE URETHANE
BB-21	PKG. OF 6 FINGER PROTECTORS
BB-7 RING INSTALLED BB-7HD RING INCLUDED

NEW IMPROVED DESIGN:
• Motor slides back for easy drive ring replacement
• Pilot light switch warns if motor left running
• Solid one piece enclosed housing
• Rugged construction yet light weight and portable (only 27 lbs)

Second Operation Machines/Tapping Machines

STC-TAP-ER TAPPING MACHINE

HEAVY DUTY TAPERED CONE DRIVE
TAPS UP TO 5/16-18 THREAD IN 1/2" STEEL!!

Click on the Catalog Number to order online!
CAT. NO.	STC-TAP-ER

FEATURES:
• Push to tap in
• Pull to tap out
• Sliding face plate
• Work table can be reversed when not needed
• Adjustable "V" plate for small parts (removable)
• Easy to set stop for tap depth control
• Comfortable bench height working area
• Long lasting tapered cone drive
• Pilot light switch warns if motor left running

1/2" capacity chuck
1/3 H.P., 115V, Single Phase
1725 RPM, A48 Frame Motor*
Weight 38 lbs

*Can be supplied without motor or with special motors for countries where this is not suitable. Prices on application.

The STC-TAP-ER has a double disc friction drive that reverses rotation instantly by the application of forward or backward hand pressure on the part being tapped.
The friction discs are driven by a Heavy Duty Tapered Cone Drive Collar mounted on the motor shaft.
The maximum spindle speed it 300 RPM**

Click on the Catalog Number to order online!
CAT. NO.	DESCRIPTION
BB-TAP-4	FRICTION DISC ASSEMBLY
BB-TAP-6	SPINDLE CONE ASSEMBLY

**Because the unit is driven merely by friction, it would be impossible to guarantee any particular R.P.M., since the R.P.M. will vary with the pressure exerted and the operation performed.

RE-TAP-ER Second Operation Machine and STC-TAP-ER Tapping Machine